The sintering procedure was carried out in a tube furnace with a diameter of 88mm and a heating zone length of 600mm. While the ceramic micro parts were sintered under air supply, a reducing H2 atmosphere was necessary for the metal microstructures to prevent oxidation of metal. 4. Examples of micro components
POWDER INJECTION MOULDING, ITS OUTSTANDING FEATURES AND DEVELOPMENT Khairur Rijal Jamaludin 4.0 INTRODUCTION Metal Injection moulding (MIM) is a development of the traditional powder metallurgy (PM) process and is rightly regarded as a branch of that technology. The standard PM process is to
MIM technology - injection-molded steel. MIM technology makes it possible to mold massive steel parts with complex shapes on plastic injection molding machines (metal powder in a binder system). The parts can then be sintered at approx. 1300 °C in a sintering furnace before they are ready for use with no or only minimal reworking required.
Technical Ceramics MIM/CIM, Solar, Silicon/BioCeramics Wire-heated kilns for use up to 1400 C and MoSi kilns for use up to 1800 C offer the best value and quality for sintering Technical Ceramics. All are available in sizes from bench-top to walk-in.
Technical Ceramics MIM/CIM, Solar, Silicon/BioCeramics Wire-heated kilns for use up to 1400 C and MoSi² kilns for use up to 1800 C offer the best value and quality for sintering Technical Ceramics. All are available in sizes from bench-top to walk-in. To remove binders, we offer
Sintering "Brown" parts are sintered in vacuum type furnaces or with controlled atmosphere furnaces. This furnace reaches 1400 C° for MIM and 2000 C°for CIM process and they have sophisticated regulation systems to optimize all parameters and if necessary treat the final product thermally.
Profile: Dou Yee Technologies Pte Ltd offers ceramic and metal injection molding. We are an ISO 9001 and ISO 13485 certified company. We are fully equipped with machinery and capabilities & provide solutions from design phase to volume production. Our products include composite tweezers, ceramic scissors and adjusters.
15 Sintering "Brown" parts are sintered in vacuum type furnaces or with controlled atmosphere furnaces. This furnace reaches 1400 C° for MIM and 2000 C°for CIM process and they have sophisticated regulation systems to optimize all parameters and if necessary treat the final product thermally.
Alibaba.com offers 2,130 vacuum furnaces 1200c products. About 79% of these are laboratory heating equipments, 11% are industrial furnace. A wide variety of vacuum furnaces 1200c options are available to you, such as resistance furnace, induction furnace, and arc furnace.
Sintering optimization of Fe-Si soft magnetic materials processed by Metal Injection Molding (MIM) Sintering study of raw zirconium silicate processed by powder injection moulding by means of a new eco-friendly binder system; Sinterización y caracterización de aleaciones de Ti de bajo coste
Micro-powder injection moulding (µPIM) is a fast-developing micro-manufacturing technique for the production of metal and ceramic components. Shape complexity, dimensional accuracy, replication fidelity, material variety combined with high-volume capabilities are some of the key advantages of the
Complex-shaped metal and ceramic parts formed by GOCERAM's Medium Pressure Powder Injection Moulding - MEDPIMOULD™ Technology - from the following materials: lMetals - MIM lStainless 316 Steel lHigh-Speed Steel (HS S) lLow-Alloy Steel lIron lTungsten Carbide lTungsten lCobalt lTitanium lCeramics - CIM lAlumina Zirconia lSilicon Nitride
brazing of metal-ceramic assemblies CIM CIP coating dry pressing extrusion fast ceramic production finishing grinding hard machining HIP hot pressing isostatic pressing lapping polishing powder processing pressing rapid prototyping sintering ultrasonic assisted machining unfired machining uniaxial pressing vacuum / gas pressure sintering wet