These tube furnaces are available in both single and dual zone configuration. As per required specifications these tube furnaces are also manufactured in both vertical and horizontal designs. Made of double walled stainless steel, the construction is durable and long lasting.
Our 1200°C Small Tube Furnace is easily operational, has an energy efficient design, fast cooling and rapid heat-up and response time. This unit offers superior radial and linear temperature uniformity and requires little or no maintenance.
Our new 12" (30 cm) and 24" (60 cm) split tube furnaces include a built-in temperature controller to conserve valuable bench space. Units are flexible enough to be mounted horizontally, remotely, or vertically on our optional floor stand (model AY793X1). Single zone split tube furnaces heat to 1200°C in only 20 minutes.
The product uses the new-type ceramic fiber material as the furnace chamber material; the furnace tube material is fine, and the tube is sealed by stainless steel flanges on its both ends, the furnace can be work under the vacuum, there are air inlet and air outlet on the flange, also it can be filled in protective air, the precision needle
21 1200°C Tube Furnaces (GHA - horizontal models) 22 1200°C Tube Furnaces (GVA - versatile models) 23 1200°C Horizontal Split Tube Furnaces (HST) 24 1200°C Vertical Split Tube Furnaces (VST) 25 1500°C & 1600°C Tube Furnaces (STF) 26 1700°C & 1800°C Tube Furnaces (CTF & PVT) 27 1200°C Three Zone Tube Furnaces (TZF)
Configure Thermo Scientific Lindberg/Blue M 1200C Split-Hinge Tube Furnaces for horizontal or vertical use. Features independent digital temperature control modules (sold semperately) which are available in standard or programmable options.Not available in Europe
Carbolite 3-Zone Horizontal and Vertical Split Tube Furnaces FZS (may need further equipment) FZS-13-100-1000 1300℃ The FST,single zone,and FZS,3-zone,split tube furnaces can be used either vertically or horizontally and have a maximum operating temperature of 1300℃.
Thermo Scientific Lindberg/Blue M™ 1200°C Split-Hinge Tube Furnace, Single Zone, HTF55122A Configure Thermo Scientific™ Lindberg/Blue M™ 1200°C Split-Hinge Tube Furnaces for horizontal or vertical use. Features independent digital temperature control modules (sold separately) which are available in standard or programmable options.
Carbolite VST 12/600 Vertical Split Tube Furnace heated length 600mm, supplied without work tube, maximum outer diameter 110mm. Carbolite Gero VST 12/600 is a single zone bench mounted furnace supplied with stand for vertical use only.
Used large Thermcraft 2200 Deg horizontal split tube furnace system in good condition. The furnace is mounted on a steel frame by hanging from the upper turn-buckles and dual rear frame clamps which provide vertical adjustment of height. The two posts under the furnace hold the incoloy process tube / vacuum chamber.
High Temperature Vertical Split Tube Furnace HTRV-A 1700°C 69 Compact Split Tube Furnaces E range 1200°C 70 Horizontal Split Tube Furnaces HST, HZS 1200°C 72 Vertical Split Tube Furnaces VST, TVS 1200°C 74 Large Split Tube Furnaces K range 1200°C 76 Horizontal and Vertical Split Tube Furnaces F range 1300°C 77 Rotary Reactor Tube Furnaces
The single zone EVT and 3-zone EVZ split tube furnaces comprise a furnace body which is hinged and split into two halves along its length. This makes exchange of work tubes easier and also enables the furnace to be used with reactors or work tubes where end flanges would make insertion into a non-split furnace difficult.
The Heatcon Split /round tubular furnace are capable of operating up to 1250 C . The furnace features high temperature furnace rod for long lasting element life. The furnace is supplied from the factory in the horizontal orientation, but can be used vertically. An optional Vertical Stand Bench is available. The Heatcon Split Furnace features:
Vertical Split Tube Furnace - VST / TVS The split tube furnace range VST (single zone) and TVS (three zone) uses free radiating wire elements embedded within the insulation of the furnace body. The benefit of this design is its flexibility with the use of tube adapters the same furnace can be used with a variety of tube diameters.
Thermcraft Protégé Split Tube Furnace. The Thermcraft Protégé Split Tube Furnace has a compact, lightweight, space saving design. This model is an excellent choice to begin thermal processing in a laboratory environment. The hinged body which is split along its length allows for easy process tube changes and simple installation of process