Furnaces - Nabertherm Click here to request a quotation. LHT 02/16 - LHT 08/18. Designed as tabletop models, these compact high-temperature chamber furnaces have a variety of advantages. The first-class workmanship using high-quality materials, combined with ease of operation, make these furnaces all-rounders in research and the laboratory.
High Temperature High Pressure Cell (HTHP) Accessory is a multipurpose cell for the FTIR analysis of solid samples in transmission, decomposition, or specular reflectance modes. Sample temperatures up to 800ºC can be obtained and the cell can operate at pressures from vacuum (0.1 torr) to 1000 psi for in-situ reaction studies.
Gas flow and pressure: Inert gas and oxygen gas flow can be achieved via two valves. Max. gas pressure shall be less than 1.2 atm. You may choose . flow meter to monitor flow rate ( to order separately) If use hydrogen gas, the furnace must be placed under fume hood or safe place
‚ Flow measurement services using Ultrasonic flow meters. ‚ Testing and Consulting services in the field of Noise and Vibration ‚ Online temperature profiling in ovens and furnaces. ‚ Maintenance and calibration of Gas Detection System ‚ Temperature and Pressure parameters calibration confirming to international standards ‚ Training
A continuous galvanizing line having an annealing furnace of an all radiant tube heating type includes a moisture removal device, dew-point meters, outlets through which the atmospheric gas in the furnace is collected and inlets through which the atmospheric gas from which moisture has been removed with the moisture removal device is fed into the furnace, the dew-point meters and the outlets
The front door is swing away style with safety interlocking. At the top of the oven is a natural gas burn-off stack with automatic spark ignitors. The system includes nitrogen flow meters for purging and process control, as well as a preheat for the process gas. Complete acid controls for nitric acid are built into the system.
cvd chemical vapor deposition furnace Model： 1200C CVD furnace Description： cvd chemical vapor deposition is widely used for various CVD experimental reaction temperature at 1600 ℃, it can also be used for CNT and graphene synthesis, CVD grown graphene,battery materials preparation and other research field.
heated furnaces 2) Cost of gas and electricity and 3) Number of hours equipment is operated. Process Heat Cost Model Base. Base Case. Furnace Flue Gas Temperature. Oxygen in Flue Gases. Excess Air. Deg. F. Deg. F. % of gross Heating Value. 1,600. 6.1. 38.3. 100. 43.50. Gas equipment provides savings when gas cost is equal to (or below) this gas
A Hydrogen Gas Manifold System, pressure switch, hydrogen flow meter, explosion-proof solenoid valve, blow-off port and a gas igniter system are all standard components to meet safety and NFPA requirements. VACUUM SYSTEM. The standard pumping system evacuates the furnace into the 10-3 Torr vacuum range. The purpose of this pumping system is to
Indirect-chilled Exothermic Atmosphere for Annealing, Brazing, Normalizing, Drawing & Tempering . Exogas atmosphere generators produce a low-cost exothermic gas for various surface treatment applications. The generator burns fuel gas and air under controlled conditions to provide an exothermic gas containing hydrogen, carbon monoxide, carbon
flow to bring the pressure to 1 atm. After the pressure reached 1 atm, the hydrogen flow is stabilized at 700 sccm. The temperature of the furnace is kept at 1100 °C and the annealing process last 1 hour. The temperature is then turned down to 950 °C. Once the temperature stabilizes, methane is introduced at 10 sccm to initiate the growth
201691Thermal Dispersion Mass Flow Measurement 1. S p e c i a l A p p l i c a t i o n S e r i e s THERMATEL® MASS FLOW MEASUREMENT 2. S Mass Flow Measurement Thermal flow meters measure flow rate in units of mass flow (SCFM or NM3/hr) rather than flow at oper- ating conditions.
Represents the amount of free carbon dioxide, mineral acids, and salts (especially sulfates or iron and aluminum) which hydrolyze to give hydrogen ions in water is reported as mill equivalents per liter of acid, or ppm acidity as calcium carbonate, or pH, the measure of hydrogen ion concentration.
" This is a brand new 1200℃ Φ100-Φ200×1200mm Vertical Tube Furnace Quartz Heating Zone 300mm, it's Widely used in ceramics, metallurgy, electronics, glass, chemical industry, machinery, refractorymaterials, new materials development, special materials, building materials, and for laboratory etc.
Steam Flow Transmitter Designed for the accurate measurement and control of process steam for end-of-the-run applications, the steam flow rate transmitter will supply an analog output signal suitable for driving remote digital indicators, chart recorders, or closing the loop to a process controller.
Alibaba.com offers 458 hydrogen annealing furnace products. About 22% of these are industrial furnace, 5% are laboratory heating equipments. A wide variety of hydrogen annealing furnace options are available to you, such as resistance furnace, induction furnace.
analyzed are low-temperature PEM FCSs with peak electrical capacities of 80 kWe for light-duty vehicle (automobile) applications and 160 kWe for bus applications. The FCSs consume a hydrogen gas fuel stream from an onboard V.H.2 Fuel cell transportation cost Analysis